Of course!
I went out to our warehouse to take a look at the Timbren Front Suspension Enhancement System Kit # TGMFK15CA and measured a height of right at 2-1/2". I have attached an image to assist.
This particular kit is confirmed to fit your 2014 Chevy Silverado 1500 as long as it's the 4WD model. view full answer...
We do have that part for you! The correct part is the Replacement Tailgate Hinge for Extang Trifecta and eMax Tonneau Covers # EX1033.
This is the same part as Extang's 35440400 that you reference. view full answer...
Based on your information, I have a solution for you. For your 2016 Chevrolet Silverado Crew Cab, I recommend the Rhino Rack Aero Bar Roof Rack system: Vortex Aero Crossbars (Item # RRVA150B-2), Legs Kit (Item # RRRLKVA), and DK Fit Kit (Item # DK377).
The Rhino Rack fits to your naked roof with clamp-style attachments. It is 59 inches long, the crossbar spread is 31-1/2 inches, and the weight capacity is 165-lbs. Locks are included and the Aero crossbars have a low-profile, aerodynamic... view full answer...
I do have an option for you but the Lund Genesis Tri-Fold Tonneau Cover that you referenced mounts on top of the bed rails so there would be nowhere for a ladder rack to mount. However, we do have a few tri-fold tonneau covers that will work with the Adarac Aluminum Series Custom Truck Bed Ladder Rack part # A4000963 for 5-1/2' bed or part # A4000948 for 6-1/2' bed which is the only ladder rack that will work with a tri-fold cover because it not only mounts atop the bed rails but also has... view full answer...
There are not any fuses on your 2018 Chevrolet Silverado 1500 that must be pulled before being flat-towed according to the owner's manual. However, you will need to disconnect the battery each time in order to prevent it from draining while in tow and in order to do this with the flick of a switch you can use the Roadmaster Automatic Battery Disconnect with Switch part # RM-766.
If you need any other parts to complete your flat-towing setup then please just let me know. view full answer...
To add a basket to the TruXedo Elevate Truck Bed Rack System item # TX96NV, I recommend the Rhino-Rack Roof Mounted Steel Cargo Basket item # RMCB02. This basket is 57" long x 42" wide and has a 165 lbs capacity.
We do not offer any sidebar rails, however we do have the Tie-Down Kit for TruXedo Elevate Rack System item # TH52FR. view full answer...
We do have a Rhino-Rack roof rack that fits a 2017 Chevy Silverado 1500, so long as you have a Crew Cab or Double Cab. I'm not sure which roof top tent you have but most only require a crossbar capacity of 165 lbs, which is what these racks have.
That is the dynamic (moving) capacity of the bars; the static (stationary) capacity is much higher, and why you can use rooftop tents on roof racks. You also want to ensure that your tent is okay to use on a roof rack that clamps onto your roof,... view full answer...
Yes we do! You can use the Tekonsha Plug-In Wiring Adapter # 3016. This will allow you to plug the Tekonsha Primus # TK90160 directly into the factory brake control port in your 2017 Chevy Silverado 1500.
I have linked our install video for you below. view full answer...
The Reese Quick-Install Custom Outboard Installation Kit # RP56015-53 and B&W Custom Installation Kit # BWRVK2504 are a fit for your 2022 Chevy Silverado 1500 and will fit with the Pro Series 15K Slider, yes.
These bracket kits have a slight difference though in that the Reese base rails are called "outboard" which means the brackets connect to the rails on the outer part of the frame rail and the base rails are a little wider in your truck bed. So basically the ease of installation comes... view full answer...
The replacement mounting brackets for the Westin HDX Grille part # 57-3785 that you referenced is the part # 57-378PK which would fit the stainless steel or black version of this guard. view full answer...
Thanks for reaching out, Ryan!
Yes, the Replacement Rubber Strips # 57-0001 will fit the Westin HDX Modular Grille Guard with Punch Plate # W94NF (57-23955) that you referenced. view full answer...
Hey Mike!
Are you talking about the pads coming undone? If so we have the Replacement Corner Pads # EX4210 you can use to get them back in operational shape.
Otherwise if you're looking for some type of tensioner, it doesn't look like that cover came with any kind of tensioner so you'll have to manually try to pull the cover tighter or replace the entire cover itself. If you do end up replacing the whole thing just let me know the year/make/model of your truck and I'll be happy to make... view full answer...
I have added a link near the bottom of this page with the instructions for the Curt Spectrum Trailer Brake Controller # C51170. When not connected to a trailer and pressing on the brakes you should see 2 blue lights flash on each side of the control knob. If you can tell me what you are seeing I can help you to determine what fault you may be having. view full answer...
The MagnaFlow Cat-Back Exhaust System part # MF15278 while installed on a 2017 Chevrolet Silverado 1500 with 5.3L V8 engine would still pass state emissions testing. The critical components in regards to emissions is the catalytic converters and since this is a cat-back system meaning it installs behind the factory catalytic converters, there will not be any problems not meeting state regulations.
I have a similar system installed on my vehicle in a state that also requires emissions testing... view full answer...
Thank you very much for your purchase from etrailer.com of the Curt Spectrum Trailer Brake Controller # C51170. We appreciate your business and the order, and the issue with the Spectrum, per the troubleshooting section of the owner's manual, is that it does not have power or it is not grounded properly.
So it seems the dealer did not install it correctly after your purchase from etrailer of the Spectrum brake controller. view full answer...
According to the Pop & Lock vehicle wiring chart, the lock wire is tan and the unlock wire is blue or gray on your 2017 Silverado 1500. However, you will need to verify this using a circuit tester like the # PTW2993. The lock wire will have power when the lock button is pushed and the unlock will have power when the unlock button is pushed. The red wire on the # PAL9555 connects to the lock wire and the black wire connects to the unlock wire. view full answer...
For your 2015 Chevrolet Silverado 1500 long bed, with the Extang Solid Fold 2.0 Hard Tonneau Cover, the correct replacement tail panel assembly is the:
-Replacement Tail Panel Assembly for Extang Solid Fold 2.0 Hard Tonneau Cover # EX83445-62.
For the replacement hinge, we have the Replacement Tail Hinge for Extang Solid Fold 2.0 Hard Tonneau Cover # EX83445-64B. view full answer...
The BAKFlip MX4 Hard Tonneau Cover part # BAK48120 and Extang Xceed Hard Tonneau Cover part # EX85445 are both great options for a 2014 Chevrolet Silverado 1500 with 5-1/2' bed. The Xceed is a quad fold whereas the MX4 is a tri fold. The extra fold means each part is lighter. This is the most notable feature but there are also improvements to the Xceed in regards to durability (enduracoat), water management, and the latch mechanism. I recommend the Xceed because of the added features and... view full answer...
Disconnecting the battery on your 2022 Chevrolet Silverado 1500 when flat towing is required per your owners manual. This is most likely to prevent excessive drain on your battery and prevent the vehicle anti-theft systems from activating. We do offer the Roadmaster Battery Disconnect for Gas # RM-766 or Diesel # RM93MR trucks. This will make disconnecting the battery much easier. view full answer...
Appreciate the purchase, and there is a hubcap option that fits the Dexstar Conventional Steel Wheel - 16" x 6" Rim - 6 on 5-1/2 - Black Powder Coat # AM20758:
- Phoenix USA Baby Moon Hubcap - Stainless Steel # PX1309SS view full answer...